China Silicon Wafer Cassettes Manufacturers, Suppliers, Factory

In semiconductor fabrication, etching is one of the major steps, along with photolithography and thin-film deposition. It involves removing unwanted materials from the surface of a wafer using chemical or physical methods. This step is carried out after coating, photolithography, and developing. It is used to remove the exposed thin film material, leaving only the desired portion of the wafer, and then removing the excess photoresist. These steps are repeated numerous times to create complex integrated circuits.

Silicon Carbide generally uses the PVT method, with a temperature of more than 2000 degrees, a long processing cycle, and low output, so the cost of Silicon Carbide substrates is very high.

At first glance, quartz (SiO2) material looks very similar to glass, but what is special is that ordinary glass is composed of many components (such as quartz sand, borax, boric acid, barite, barium carbonate, limestone, feldspar, soda ash, etc.), while quartz only contains SiO2, and its microstructure is a simple network composed of silicon dioxide tetrahedral structural units.

Within the silicon carbide (SiC) industry chain, substrate suppliers hold significant leverage, primarily due to value distribution. SiC substrates account for 47% of the total value, followed by epitaxial layers at 23%, while device design and manufacturing constitute the remaining 30%. This inverted value chain stems from the high technological barriers inherent to substrate and epitaxial layer production. Three major challenges plague SiC substrate growth: stringent growth conditions, slow growth rates, and demanding crystallographic requirements. These complexities contribute to increased processing difficulty, ultimately resulting in low product yields and high costs. Furthermore, the epitaxial layer’s thickness and doping concentration are critical parameters directly impacting the final device performance.

In the field of single crystal growth, the temperature distribution within the crystal growth furnace plays a critical role. This temperature distribution, commonly referred to as the thermal field, is a vital factor that influences the quality and characteristics of the crystal being grown. The thermal field can be categorized into two types: static and dynamic.

As a leading upstream graphite material manufacturer in the semiconductor industry, Semicorex prioritizes the availability, usability, and durability of its materials, setting the standard for excellence in the field.