China alumina combustion boat Manufacturers, Suppliers, Factory

In the process of silicon wafer manufacturing, after the crystal rod is cut into silicon wafers, it will need to be polished and cleaned to obtain a single crystal silicon wafer like a mirror.

We know that further epitaxial layers need to be built on top of some wafer substrates for device fabrication, typically LED light-emitting devices, which require GaAs epitaxial layers on top of silicon substrates; SiC epitaxial layers are grown on top of conductive SiC substrates for building devices such as SBDs, MOSFETs, etc. for high voltage, high current and other power applications; GaN epitaxial layers are built on top of semi-insulating SiC substrates for building HEMTs and other RF applications.

Etching is an essential process in semiconductor manufacturing. This process can be categorized into two types: dry etching and wet etching. Each technique has its own advantages and limitations, making it crucial to understand the differences between them. So, how do you choose the best etching method? What are the pros and cons of dry etching and wet etching?

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

The growth of GaN epitaxy on GaN substrate presents a unique challenge, despite the material’s superior properties when compared to silicon. GaN epitaxy offers significant advantages in terms of band gap width, thermal conductivity, and breakdown electric field over silicon-based materials. This makes the adoption of GaN as the backbone for the third generation of semiconductors, which provide enhanced cooling, lower conduction loss, and improved performance under high temperatures and frequencies, a promising and crucial advancement for the photonic and micro-electronic industries.

This article delves into the usage and future trajectory of silicon carbide (SiC) boats in relation to quartz boats within the semiconductor industry, specifically focusing on their applications in solar cell manufacturing.