China Shaft Spacer Sleeve Manufacturers, Suppliers, Factory

In the process of growing SiC and AlN single crystals by the physical vapor transport method (PVT), components such as the crucible, seed crystal holder and guide ring play a vital role. During the preparation process of SiC, the seed crystal is located in a relatively low temperature region, while the raw material is in a high temperature region exceeding 2400°C. The raw materials decompose at high temperatures to form SiXCy (including Si, SiC₂, Si₂C and other components).

Defect-free epitaxial growth occurs when one crystal lattice has nearly identical lattice constants to another. Growth happens when lattice sites of the two lattices at the interface region are approximately matched, which is possible with a small lattice mismatch (less than 0.1%). This approximate matching is achieved even with elastic strain at the interface, where each atom is slightly displaced from its original position in the boundary layer. While a small amount of strain is tolerable for thin layers and even desirable for quantum well lasers, the strain energy stored in the crystal is generally lowered by the formation of misfit dislocations, which involve a missing row of atoms in one lattice.

Silicon carbide (SiC) has important applications in areas such as power electronics, high-frequency RF devices, and sensors for high-temperature-resistant environments due to its excellent physicochemical properties. However, the slicing operation during SiC wafer processing introduces damages on the surface, which, if left untreated, can expand during the subsequent epitaxial growth process and form epitaxial defects, thus affecting the yield of the device.

Silicon carbide (SiC) is an inorganic substance. The amount of naturally occurring silicon carbide is very small. It is a rare mineral and is called moissanite. Silicon carbide used in industrial production is mostly artificially synthesized.

C/C composite is a carbon-carbon composite material made of carbon fibers as reinforcement and carbon as matrix through processing and carbonization, with excellent mechanical and high-temperature resistance properties. The material was initially used in aerospace and special fields, and with the maturity of the technology, it has been gradually used in photovoltaic, automotive, lithium battery, medical devices and other fields.

SiC substrate material is the core of SiC chip. The production process of the substrate is: after obtaining the SiC crystal ingot through single crystal growth; then preparing the SiC substrate requires smoothing, rounding, cutting, grinding (thinning); mechanical polishing, chemical mechanical polishing; and cleaning, testing, etc. Process