China Pancake Susceptors Manufacturers, Suppliers, Factory

Currently, most SiC substrate manufacturers use a new crucible thermal field process design with porous graphite cylinders: placing high-purity SiC particle raw materials between the graphite crucible wall and the porous graphite cylinder, while deepening the entire crucible and increasing the crucible diameter.

The U.S. Department of Energy (DOE) recently confirmed a $544 million loan to SK Siltron, a semiconductor wafer manufacturer under SK Group.

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

The development of 3C-SiC, a significant polytype of silicon carbide, reflects the continuous advancement of semiconductor material science. In the 1980s, Nishino et al. first achieved a 4 μm thick 3C-SiC film on a silicon substrate using chemical vapor deposition (CVD)[1], laying the foundation for 3C-SiC thin-film technology.