China Etching Carrier Tray Manufacturers, Suppliers, Factory

Graphite susceptor is one of the essential parts in the MOCVD equipment, is the carrier and the heater of the wafer substrate. Its properties of thermal stability and thermal uniformity play a decisive role in the quality of wafer epitaxial growth, which directly determines the uniformity and purity of the layer materials, in a result its quality directly affects the preparation of epitaxy.

Gallium oxide (Ga2O3) as an "ultra-wide bandgap semiconductor" material has garnered sustained attention. Ultra-wide bandgap semiconductors fall under the category of "fourth-generation semiconductors," and in comparison to third-generation semiconductors such as silicon carbide (SiC) and gallium nitride (GaN), gallium oxide boasts a bandgap width of 4.9eV, surpassing silicon carbide's 3.2eV and gallium nitride's 3.39eV. A wider bandgap implies that electrons require more energy to transition from the valence band to the conduction band, endowing gallium oxide with characteristics like high voltage resistance, high-temperature tolerance, high power capability, and radiation resistance.

Every country is aware of the importance of chips and is now accelerating the construction of its own chip manufacturing supply chain ecosystem to prevent another chip shortage problem. But the advanced foundries without next-gen chip designers would be the same as “Fabs without Chips”.

Chemical Vapor Deposition (CVD) refers to a process technology where multiple gaseous reactants at varied partial pressures undergo a chemical reaction under specific temperature and pressure conditions. The resulting solid substance deposits on the surface of the substrate material, thereby obtaining the desired thin film. In traditional integrated circuit manufacturing processes, the obtained thin film materials are generally compounds such as oxides, nitrides, carbides, or materials like polycrystalline silicon, amorphous silicon, etc.

Silicon wafer surface polishing is a crucial process in semiconductor manufacturing. Its primary goal is to achieve extremely high standards of surface flatness and roughness by removing micro-defects, layers of stress damage, and contamination from impurities such as metal ions.

Currently, many semiconductor devices employ mesa device structures, which are predominantly created through two types of etching: wet etching and dry etching. While the simple and rapid wet etching plays a significant role in semiconductor device fabrication, it has inherent drawbacks such as isotropic etching and poor uniformity, which result in limited control when transferring small-sized patterns. Dry etching, however, with its high anisotropy, good uniformity, and repeatability, has become prominent in semiconductor device fabrication processes. The term “dry etching” broadly refers to any non-wet etching technology used for removing surface materials and transferring micro and nano patterns, including laser etching, plasma etching, and chemical vapor etching. The dry etching discussed in this text specifically pertains to the narrow application of processes using plasma discharge—either physical or chemical—to modify material surfaces.