China sintered sic Manufacturers, Suppliers, Factory

The third generation of semiconductor materials AlN belongs to the direct bandgap semiconductor, its bandwidth of 6.2 eV, with high thermal conductivity, resistivity, breakdown field strength, as well as excellent chemical and thermal stability, is not only an important blue light, ultraviolet materials, or electronic devices and integrated circuits, important packaging, dielectric isolation and insulation materials, especially for high-temperature high-power devices. In addition, AlN and GaN have a good thermal match and chemical compatibility, AlN used as GaN epitaxial substrate, can significantly reduce the defect density in GaN devices, improve device performance.

The development of 3C-SiC, a significant polytype of silicon carbide, reflects the continuous advancement of semiconductor material science. In the 1980s, Nishino et al. first achieved a 4 μm thick 3C-SiC film on a silicon substrate using chemical vapor deposition (CVD)[1], laying the foundation for 3C-SiC thin-film technology.

Silicon carbide (SiC), as an important high-end ceramic material, has excellent properties such as high-temperature resistance, corrosion resistance, wear resistance, high-temperature mechanical strength, and oxidation resistance. These properties make it highly promising for applications in high-tech fields such as semiconductors, nuclear energy, defense, and space technology.

Silicon carbide (SiC) crystal growth furnaces are the cornerstone of SiC wafer production. While sharing similarities with traditional silicon crystal growth furnaces, SiC furnaces face unique challenges due to the material’s extreme growth conditions and complex defect formation mechanisms. These challenges can be broadly categorized into two areas: crystal growth and epitaxial growth.

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.