China PECVD Chamber Manufacturers, Suppliers, Factory

Chemical vapor deposition CVD refers to the introduction of two or more gaseous raw materials into a reaction chamber under vacuum and high temperature conditions, where the gaseous raw materials react with each other to form a new material, which is deposited on the wafer surface.

Silicon Carbide (SiC) single crystals are primarily produced using the sublimation method. After removing the crystal from the crucible, several intricate processing steps are required to create usable wafers.

The Silicon Carbide (SiC) production process encompasses the preparation of substrate and epitaxy from the materials side, followed by chip design and manufacturing, device packaging, and finally, distribution to downstream application markets. Among these stages, substrate material processing is the most challenging aspect of the SiC industry. SiC substrates are both hard and brittle, making cutting, grinding, and polishing extremely difficult. This increases the likelihood of defects during processing and reduces the yield rate. Currently, major international SiC manufacturers are planning to transition from 6-inch to 8-inch SiC wafers. Overcoming the challenges associated with 8-inch substrates has become a critical benchmark for the SiC industry. This article will introduce the key parameters of SiC substrates.

The development of high-powered blue and UV LEDs has enabled the creation of full-color LED TV displays, as well as white LED automotive and domestic lighting. These LEDs are based on Gallium Nitride, which is deposited on substrate wafers supported by CVD SiC-coated graphite susceptor using the MOCVD process.

Gallium oxide (Ga2O3) has emerged as a promising material for various applications, particularly in power devices and radio frequency (RF) devices. In this article, we explore the key opportunities and target markets for gallium oxide in these domains.

We know that further epitaxial layers need to be built on top of some wafer substrates for device fabrication, typically LED light-emitting devices, which require GaAs epitaxial layers on top of silicon substrates; SiC epitaxial layers are grown on top of conductive SiC substrates for building devices such as SBDs, MOSFETs, etc. for high voltage, high current and other power applications; GaN epitaxial layers are built on top of semi-insulating SiC substrates for building HEMTs and other RF applications.