China Epitaxial Wafer Manufacturers Manufacturers, Suppliers, Factory

As a third-generation semiconductor material, Gallium Nitride is often compared with Silicon Carbide. Gallium Nitride still demonstrates its superiority with its large bandgap, high breakdown voltage, high thermal conductivity, high saturated electron drift velocity and strong radiation resistance. But it is undeniable that, like Silicon Carbide, Gallium Nitride also has various technical difficulties.

A diffusion furnace is a specialized piece of equipment used to introduce impurities into semiconductor wafers in a controlled manner. These impurities, called dopants, change the electrical properties of semiconductors, allowing different types of electronic components to be made. This controlled diffusion process is critical to the production of transistors, diodes and integrated circuits.

Silicon carbide ceramics offer numerous advantages in the optical fiber industry, including high-temperature stability, low thermal expansion coefficient, low loss and damage threshold, mechanical strength, corrosion resistance, good thermal conductivity, and low dielectric constant. These properties make SiC ceramics an ideal material for fiber optic sensors, lasers, and high-power optical fiber applications. As demand in the optical fiber field increases, the application prospects for silicon carbide ceramics will become increasingly prominent.

Currently, many semiconductor devices employ mesa device structures, which are predominantly created through two types of etching: wet etching and dry etching. While the simple and rapid wet etching plays a significant role in semiconductor device fabrication, it has inherent drawbacks such as isotropic etching and poor uniformity, which result in limited control when transferring small-sized patterns. Dry etching, however, with its high anisotropy, good uniformity, and repeatability, has become prominent in semiconductor device fabrication processes. The term “dry etching” broadly refers to any non-wet etching technology used for removing surface materials and transferring micro and nano patterns, including laser etching, plasma etching, and chemical vapor etching. The dry etching discussed in this text specifically pertains to the narrow application of processes using plasma discharge—either physical or chemical—to modify material surfaces.

Compared with the PVT method, the liquid phase method for growing SiC has the following advantages:

In traditional silicon power device fabrication, high-temperature diffusion and ion implantation stand as the primary methods for dopant control, each with its advantages and disadvantages. Typically, high-temperature diffusion is characterized by its simplicity, cost-effectiveness, isotropic dopant distribution profiles, and lower introduction of lattice damage. Conversely, ion implantation, though complex and costly, enables precise independent control over dopant concentration and depth but introduces a significant number of point defects and extended defects into the substrate.