China Silicon Carbide Coated Graphite Susceptor Manufacturers, Suppliers, Factory

In the process of wafer preparation, there are two core links: one is the preparation of the substrate, and the other is the implementation of the epitaxial process. The substrate, a wafer carefully made of semiconductor single crystal material, can be directly put into the wafer manufacturing process as a basis to produce semiconductor devices, or further enhance the performance through the epitaxial process.

SiC's own characteristics determine its single crystal growth is more difficult. Due to the absence of Si:C=1:1 liquid phase at atmospheric pressure, the more mature growth process adopted by the mainstream of the semiconductor industry can not be used to grow the more mature growth method-straight pulling method, the descending crucible method and other methods for growth. After theoretical calculations, only when the pressure is greater than 105 atm and the temperature is higher than 3200 ℃, can we get the stoichiometric ratio of Si:C = 1:1 solution. pvt method is currently one of the more mainstream methods.

Gallium Nitride (GaN) is an important material in semiconductor technology, known for its exceptional electronic and optical properties. GaN, as a wide-bandgap semiconductor, has a bandgap energy of approximately 3.4 eV, making it ideal for high-power and high-frequency applications.

Thick, high-purity silicon carbide (SiC) layers, typically exceeding 1mm, are critical components in various high-value applications, including semiconductor fabrication and aerospace technologies. This article delves into the Chemical Vapor Deposition (CVD) process for producing such layers, highlighting key process parameters, material characteristics, and emerging applications.

The third generation of semiconductor materials AlN belongs to the direct bandgap semiconductor, its bandwidth of 6.2 eV, with high thermal conductivity, resistivity, breakdown field strength, as well as excellent chemical and thermal stability, is not only an important blue light, ultraviolet materials, or electronic devices and integrated circuits, important packaging, dielectric isolation and insulation materials, especially for high-temperature high-power devices. In addition, AlN and GaN have a good thermal match and chemical compatibility, AlN used as GaN epitaxial substrate, can significantly reduce the defect density in GaN devices, improve device performance.

Single crystal silicon and polycrystalline silicon each have their own unique advantages and applicable scenarios. Single crystal silicon is suitable for high-performance electronic products and microelectronics due to its excellent electrical and mechanical properties. Polycrystalline silicon, on the other hand, dominates the field of solar cells due to its low cost and good photoelectric conversion efficiency.