China Horizontal Susceptor Of CVD Process Manufacturers, Suppliers, Factory

Currently, many semiconductor devices employ mesa device structures, which are predominantly created through two types of etching: wet etching and dry etching. While the simple and rapid wet etching plays a significant role in semiconductor device fabrication, it has inherent drawbacks such as isotropic etching and poor uniformity, which result in limited control when transferring small-sized patterns. Dry etching, however, with its high anisotropy, good uniformity, and repeatability, has become prominent in semiconductor device fabrication processes. The term “dry etching” broadly refers to any non-wet etching technology used for removing surface materials and transferring micro and nano patterns, including laser etching, plasma etching, and chemical vapor etching. The dry etching discussed in this text specifically pertains to the narrow application of processes using plasma discharge—either physical or chemical—to modify material surfaces.

Thick, high-purity silicon carbide (SiC) layers, typically exceeding 1mm, are critical components in various high-value applications, including semiconductor fabrication and aerospace technologies. This article delves into the Chemical Vapor Deposition (CVD) process for producing such layers, highlighting key process parameters, material characteristics, and emerging applications.

Chemical Vapor Deposition (CVD) refers to a process technology where multiple gaseous reactants at varied partial pressures undergo a chemical reaction under specific temperature and pressure conditions. The resulting solid substance deposits on the surface of the substrate material, thereby obtaining the desired thin film. In traditional integrated circuit manufacturing processes, the obtained thin film materials are generally compounds such as oxides, nitrides, carbides, or materials like polycrystalline silicon, amorphous silicon, etc.

To achieve the high-quality requirements of IC chip circuit processes with line widths smaller than 0.13μm to 28nm for 300mm diameter silicon polishing wafers, it is essential to minimize contamination from impurities, such as metal ions, on the wafer's surface.

Oxidation processes play a critical role in preventing such problems by creating a protective layer on the wafer, known as the oxide layer, which acts as a barrier between different chemicals.

As a wide-bandgap (WBG) semiconductor material, SiC's wider energy difference gives it higher thermal and electronic properties compared to traditional Si. This feature enables power devices to operate at higher temperatures, frequencies and voltages.