China graphite soft felt Manufacturers, Suppliers, Factory

Silicon carbide (SiC) power devices are semiconductor devices made of silicon carbide materials, mainly used in high-frequency, high-temperature, high-voltage and high-power electronic applications. Compared with traditional silicon (Si)-based power devices, silicon carbide power devices have higher bandgap width, higher critical breakdown electric field, higher thermal conductivity and higher saturated electron drift velocity, which makes them have great development potential and application value in the field of power electronics.

There are two types of epitaxy: homogeneous and heterogeneous. In order to produce SiC devices with specific resistance and other parameters for different applications, the substrate must meet the conditions of epitaxy before production can begin. The quality of the epitaxy affects the device's performance.

Heat treatment is one of the essential and important processes in the semiconductor process. Thermal process is the process of applying thermal energy to a wafer by placing it in an environment filled with a specific gas, including oxidation/diffusion/annealing, etc.

While there is currently an oversupply of memory semiconductors due to a sluggish global economy, analog chips for automotive and industrial applications remain in short supply. Lead times for these analog chips can be as long as 40 weeks, compared to around 20 weeks for memory stocks.

The thermal conductivity of bulk 3C-SiC, recently measured, is the second-highest among inch-scale large crystals, ranking just below diamond. Silicon carbide (SiC) is a wide bandgap semiconductor extensively used in electronic applications, and it exists in various crystalline forms known as polytypes. Managing high localized heat flux is a significant challenge in power electronics, as it can lead to device overheating and long-term performance and reliability issues.

The four main molding methods for graphite molding are: extrusion molding, molding, vibratory molding and isostatic molding. Most of the common carbon/graphite materials on the market are molded by hot extrusion and molding (cold or hot), and isostatic molding is a method with leading molding performance. Vibration molding is generally used to manufacture medium and coarse structural graphite, particle size between 0.5-2mm particle size, generally dominated by di-roasted graphitized products, density between 1.55-1.75kg/m³, coarser particles, rougher surface, can not be used for precision machining. It is mainly used in chemical industry and metal smelting.